Kameras remonta komplekts Thumbs Up Big 12/6/6 ielāpi + 20 ml TREP41
Product technical specifications
- Tube repair set in a compact plastic box
Fast and reliable repair of snake bites" (pinches) and cuts
Convenient to carry in a backpack or panniers
Each patch enclosed in protective airtight tin foil to keep dust and dirt away- Special rubber solution will permanently bond a patch to a tube in just about 5-10 minutes
- Set includes:
20 ml tube of rubber glue- Metal rasp for rubbing tube surface (20x30 mm)
6 round patches (25 mm)
12 rounded rectangular patches (25x35 mm)
6 rounded rectangular patches (30x50 mm)
2 rubber tubes for old type of Dunlop (DV) valve
Box size: 135x70x25 mm- How to use:
- Locate hole in a tube by emerging in water or inspecting airleaks by listening or feeling with senstive skin area.
- Using a grasp or sandpaper, lightly abrade area around hole. Abrade an area larger than patch size.
- When possible, clean area with alcohol and allow it to dry completely.
- Open glue tube and puncture seal. Apply thin coat of glue and spread evenly around hole area. Spread area of glue larger than patch size. Use a clean finger or back of patch to spread glue evenly in a thin layer. Do not apply too much glue. Glue layer should not appear "glopped" on.
- Allow glue to dry. This may take several minutes. Test by touching only perimeter area of glue, not where patch will contact.
- Peel patch from patch backing. Handle patch only by edges.
- Center patch to hole and lay patch on tube.
- Apply pressure to patch, especially at edges.
- If possible, maintain pressure for several minutes.
- Leave clear plastic cover on patch, do not peel up.
- Mount tube inside tire and inflate.