Ķēdes smērviela CeramicSpeed UFO Drip All Conditions 100ml CER112160

• Thoroughly shake bottle before use.


• For new chains or the first application, start with a fully clean and dry chain.


• Apply UFO Drip All Conditions wax coating directly to the chain rollers over the cassette while rotating the chain slowly to coat the entire length of the chain twice.


• Next, apply UFO coating to the inside of the chain, along the rollers on the bottom span over the chain and coat the entire length of the chain twice. A complete coating will use about 8ml, or an 8-gram difference by weight.


• For best penetration, continue rotating the cranks for 30 to 60 seconds to ensure the wax can get down between the chain rollers and links.


• For best durability and clean performance, let the UFO Drip chain coating dry overnight.


• It is not suggested to wipe off the wax from the surface of the chain. A proper application will last 300km / 180 miles in generally dry and clean conditions.


• For standard reapplication, wipe off any surface dust with a clean towel and apply UFO coating to the chain links above the cassette along the length of the chain twice.


• If the drivetrain has been contaminated, the bike has been washed, or ridden in wet conditions we suggest a full clean and reapplication following the first application guidelines. If you ride in the wet often, we recommend the UFO Drip Wet Conditions.


• Keep it out of direct sunlight and in a temperature range of 5-30 degrees Celsius (30-85 Fahrenheit). – do not freeze.